SHIPPING TO THE US? No duties and no taxes!

SHIPPING TO THE US? No duties or charges upon delivery!

Contact us for expert assistance.

Your cart

Your cart is empty

Continue shopping
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior
AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior

AH4500Si Ducted Air Handler Split System by CellarPro Cooling Systems - Interior

Typically Ships Within 3-4 Weeks.
$5,795.00 USD
?

Add this item if your cellar is in an unheated environment and will be exposed to temperatures below your desired wine cellar temperature. Heaters are fully integrated and controlled through the digital control panel. Heaters must be ordered with either the remote control/display panel or one of the networkable thermostat add-ons, and must installed in the factory (ie integrated heaters cannot be retrofitted). These heaters are designed for adding heat only, not for dehumidification.

?
Add this option if using the bottle probe and you need to add up to 25ft of cord length.
?
Add this option if using the bottle probe and you need to add up to 50ft of cord length.
?
Add this option if the units fresh air intake will be below 20°F.
?

This option is strongly recommended for installations where the unit and its built-in display/control panel is not visible within the wine cellar. This panel will allow you to monitor and adjust unit settings from the location of your choice and is hard-wired to the unit (10 feet of wiring included – please contact us after ordering if you require extra wiring length)

?

Add humidity to your cellar through a digital control (hook up to an external water line required). Adjust in 5% increments, up to 70%. This factory-installed add-on mounts to the rear of the system and measures 14 3/4" w x 9 5/8" deep x 12 1/4 h.

?

Replacement disposable polyester air filters for Air Handler systems.

?
Add this option if you want to connect your cooling unit to an Ecobee Pro thermostat (thermostat not included). Up to 10 feet of wiring is included. If you require more than 10 feet, please include a note with your order with your desired length. Unless your thermostat has a separate probe, it will need to be installed within the cooled wine cellar environment. This upgrade is not compatible with the CellarPro bottle probe add-on.
?
Add this option if you want to connect your cooling unit to a Nest or Honeywell thermostat (thermostat not included). Up to 10 feet of wiring is included. If you require more than 10 feet, please include a note with your order with your desired length. Unless your thermostat has a separate probe, it will need to be installed within the cooled wine cellar environment. This upgrade is not compatible with the CellarPro bottle probe add-on.
Shipping calculated at checkout

Have questions? Contact Us or Book an Appointment with a specialist.

Description Desc.
Specifications & Installation Specs
Shipping Information Shipping
Warranty Details Warranty
Configuration Options
IMPORTANT: Please be sure to review the add-on options above to confirm you have all accessories necessary for your particular installation. Many are factory-installed and difficult to accommodate as a separate purchase/installation.
The CellarPro AH4500Si-ECX wine cellar cooling system provides robust cooling power and adjustable humidity control for cellars up to 1250 cubic feet (assuming proper insulation and vapor barrier, no glass - request a thermal load calculation if your cellar contains glass). New EC fans on both hot and cold sides provide industry-leading energy efficiency, saving on average $300.77 in annual energy costs* and offering quieter operation.
Both the evaporator and condenser units can be ducted up to 100 feet (50 feet for each duct) and with interchangeable collar/grill locations for supply air, allowing for highly customized installations.
This listing includes an indoor condensing unit, but a similar model with an outdoor condensing unit is also available. Please note that condensing units exhaust warm air that needs to be properly dissipated so please consider this requirement and confirm suitability before ordering this indoor model. 
*when compared to AC fans, assuming 75% run time and $0.15/kWh.

Specifications & Installation

  • Cooling Capacity
  • - Low Fan Speed: 3607 BTUH at 55°F
  • - Medium Fan Speed: 3975 BTUH at 55°F
  • - High Fan Speed: 4328 BTUH at 55°F
  • Sound Measurement
  • - Evaporator (Ducted) Low Fan Speed: 38 dbA
  • - Evaporator (Ducted) Medium Fan Speed: 44 dbA
  • - Evaporator (Ducted) High Fan Speed: 52 dbA
  • - Condenser Low Fan Speed: 43 dbA (ducted), 56 dbA (not ducted)
  • - Condenser Medium Fan Speed: 50 dbA (ducted), 63 dbA (not ducted)
  • - Condenser Hight Fan Speed: 55 dbA (ducted), 68 dbA
  • Dimensions
  • - Evaporator 18 5/8" w x 18 5/8” d x 19 1/4”h
  • - Condenser 18 5/8" w x 18 5/8” d x 19 1/4”h
  • Weight
  • 171 lbs (evaporator = 60 lbs, condenser = 111lbs)
  • Power/Rating
  • 110V AC / 60 Hz
  • Compressor Amps:
  • - Startup: 42 Amps
  • - Running Amps Cord-Connected: 10.6 Amps
  • - Total Watts: 636 (medium fan speed)
  • Ducting
  • 8" Diameter
Owners Manual new window Spec Sheet new window Evaporator/Condenser Cut Sheet new window Ducting Configurations new window Installation Configurations new window

Shipping Information

Orders of this item are typically shipped anywhere from 3 - 10 business days from the date of order. If you would like a more specific estimate, please contact us.

Smaller refrigeration units will be shipped by common carrier such as Fedex or UPS. Larger refrigeration units or systems will be shipped on a pallet via an LTL freight carrier and delivered curbside with a power tailgate. Shipping may take anywhere from 1 - 2 weeks, depending on your location.

Please note: If this unit is on backorder or subject to longer lead times, it will be noted at the top of the page, below the product title.

Warranty Details

This product is warrantied by Cellar Pro Cooling Systems.

For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service and the name of a CellarPro designated repair facility nearest you, contact your CellarPro dealer. You may also contact CellarPro directly by calling us at 1.877.726.8496.

 

Configuration Options

  • CellarPro AH4500Si-ECX units are designed to be ducted, with the evaporator near (or inside) the cellar, and the condensing unit in a remote interior location up to 100 feet away.
  • The evaporator and the condensing unit each can be ducted up to 100 Equivalent Feet (50 Feet per Duct) with 8-inch ducting .
  • CellarPro's split configuration allows multiple ducting alternatives, as follows:
  1. Collars or grills for EXHAUST (ie Supply) are located at the front, top or rear of the cooling system, and are interchangeable to meet your specific requirement.
  2. Collars or grills for INTAKE (ie Return) are located at each end (left: evaporator, and right: condenser), and include professional-grade air filters to protect the unit.
  • We recommend pulling the fresh air intake (hot-side) from a temperature-controlled environment (must be outside the cellar). If the hot-side exhaust will be directed to a different space than the intake, always make sure that both spaces are sufficiently voluminous so that you don't run into issues with negative pressure.
  • A bottle probe temperature sensor (10' cord) plus your choice of duct collars, indoor grills and blank plates are included in the price of the cooling system.
  • CellarPro Air Handler Split systems offer a choice of 110V / 60Hz wiring and power configurations:
  1. Two permanent power connections for the evaporator (2.0 amps / 15 amp circuit breaker) and the condensing unit (10.7 amps / 15 amp circuit breaker). This wiring configuration is recommended for Valve Control.
  2. One permanent power connection for the entire system (20 amp circuit breaker). In this configuration, the condensing unit must be wired to the evaporator, and must be used with Electronic Control.

The amp data above is not valid when the integrated heater and/or humidifier are configured with the cooling unit - please consult those Owner's Manuals for the additional amps required when using those upgrades.

  • When the control panel is difficult to access, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
  • The condensing unit requires 12 inches of unobstructed space in front of the coils, and requires approx. 600-700 CFM of ventilation when installed in a confined space.
  • For installation in environments below 20F down to -20F , Electronic Control is the required configuration, and the Fan-Cycling Switch is required in addition to the compressor heater.
  • The evaporator should never be exposed to temperatures below 32F.
  • Access to the left and right side of the evaporator unit is required for installation.
  • All split systems must be installed and charged on site by a qualified HVAC professional.
  • A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.

Recommended Products

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)