Configuration Options
- CellarPro 1800 series cooling units are self-contained and fully-charged. They are designed to be installed through-the-wall or just above the cellar in an air-conditioned space (ie. not a hot attic or other unconditioned space)
- 1800 series units cannot be front ducted but certain models (XT and XTS) offer rear ducting with the purchase of the rear duct hood or rear duct kit add-on.
- On the cold side, this unit intakes from the front and exhausts cold air from the bottom (so the front 8 inches of the cooling unit must be inside the cellar.)
- This unit requires fresh air intake at the rear.
- If the fresh air intake (on the hot side) will receive air below below 40°F, you will require a compressor heater (see add-on options above).
- If the fresh air intake (on the hot side) will pull air below 20°F, down to -20°F, you must add both the compressor heater and fan cycling switch (see add-on options above).
- This unit must always be installed and operated in an upright position.
Please leave us a short review
Note sure what to write?
You’re not alone. Many people struggle with this. Here are a few tips:
- Describe any obstacles that kept you from moving forward on this project originally, if any.
- What was the result that you found from purchasing your wine cellar?
- What specific feature do you like the most about your wine cellar?
- What other benefits have you found with your wine cellar?
- Would you recommend our company to others? If so, why?
- Finally, anything else you’d like to add. Easy. You’re done.
If you are not sure how to leave a review on any of the places above don’t worry, simply use our Contact Form to send us your feedback directly.