Specs & Install
| Cellar Size (assuming proper insulation - no glass) | 3500 cubic feet |
|
BTU/h (85° F condenser air intake temperature) |
10268 (high fan speed) |
Dimensions (Evaporators, Ceiling Mounted Inside Cellar x 2): 35.75"L x 14.5"W x 12.75" H
Dimensions (Condenser, Unit Outside Cellar): 31.18"L x 10.75"W x 23.25"H
Refrigerant: R-134a
HP: 1.5
Voltage Rating: Evaporator = 120V (15 amp dedicated circuit required), Condenser = 220V (15 amp dedicated circuit required)
Weight: 66lbs (evaporators x 2), 84lbs (220V condenser)
Amps: Evaporator = Primary 1.74 (Running Amps); Secondary 1.04 (Running Amps), Condenser = LRA 23.6, RLA 5.76, FLA 6.6
Drain Line: 1/4” ID clear plastic tubing (not provided - rigid tube recommended)
Ducting: This is not a ductable unit
View Installation Manual for Units with 24V Conversion Kit
Please leave us a short review
Note sure what to write?
You’re not alone. Many people struggle with this. Here are a few tips:
- Describe any obstacles that kept you from moving forward on this project originally, if any.
- What was the result that you found from purchasing your wine cellar?
- What specific feature do you like the most about your wine cellar?
- What other benefits have you found with your wine cellar?
- Would you recommend our company to others? If so, why?
- Finally, anything else you’d like to add. Easy. You’re done.
If you are not sure how to leave a review on any of the places above don’t worry, simply use our Contact Form to send us your feedback directly.