Specs & Install
| Cellar Size (assuming proper insulation - no glass) | 1000 cubic feet |
|
BTU/h (85° F condenser air intake temperature) |
3650 |
Dimensions (Evaporator, Unit Wall Mounted Inside Cellar): 16.1”D x 20.5”W x 15.5”H
Dimensions (Condenser, Unit Outside Cellar): 220V Unit = 31.18"L x 10.75"W x 21.18"H
Refrigerant: R-134a
HP: 1220V Unit = 0.6
Voltage Rating: 220V Unit = 220V (15 amp dedicated circuit required)
Weight: 57lbs (evaporator), 55lbs (220V condenser)
Amps: Evaporator: 1 (running amps), Condenser: 220V Unit = LRA 10.7, RLA 2.7, FLA 3.1
Drain Line: 1/2” ID clear plastic tubing (not provided)
Ducting: Evaporator can be ducted into cellar (up to 25 feet)
View Installation Manual for 110V Units (discontinued)
View Installation Manual for 220V Units
View Installation Manual for Units with 24V Conversion Kit
Please leave us a short review
Note sure what to write?
You’re not alone. Many people struggle with this. Here are a few tips:
- Describe any obstacles that kept you from moving forward on this project originally, if any.
- What was the result that you found from purchasing your wine cellar?
- What specific feature do you like the most about your wine cellar?
- What other benefits have you found with your wine cellar?
- Would you recommend our company to others? If so, why?
- Finally, anything else you’d like to add. Easy. You’re done.
If you are not sure how to leave a review on any of the places above don’t worry, simply use our Contact Form to send us your feedback directly.