VINdustry Label View Two Bottle Deep Wine Pegs (Pair)

VINdustry wine pegs are a popular modern wine storage and display solution. Create layouts to maximize capacity or spread bottles out for sparser displays by installing VINdustry wine pegs in the location of your choosing.

This pair of VINdustry wine rack pegs supports and displays two standard 750ml wine bottles, one in front of the other.

Choose from 4 high end finishes:

Discontinued milled aluminum finish with grey rubber rings is available at a discount while stock lasts.
New finishes without rubber rings include matte black, polished aluminum and gold.

VINdustry wine pegs can be mounted in a variety of ways with appropriate hardware:

Standard bolts that mount through the back side of a ¾” panel (plywood or high density MDF core is recommended for proper stability). The bolts will be installed onto the panel and then the panel mounted to the wall. You must have access to the back of the panel to affix the pegs with these bolts.

50mm anchor bolts – choose these if anchoring directly into wood or high-density MDF that is a minimum of 3/4" thick or if your plywood or MDF substrate material is cladded with up to 10mm of other material you must drill through first (eg. 10mm acrylic material on top of plywood backing).

70mm anchor bolts – choose these if your plywood or MDF substrate material is cladded with a thicker material, up to 30mm, you must drill through first (eg. 30mm of tile on top of plywood backing).

Masonry anchor bolts - choose these if you are mounting your pegs into a concrete wall and will achieve 3/4" embedment into the concrete.

Note that VINdustry pegs are NOT suitable for mounting to drywall, unless there is plywood directly behind the drywall that wood anchor bolts can mount into. In this case, choose the 70mm wood anchor bolts option.